Dodge Charger: EXTERIOR LIGHTS / Automatic Headlights

Dodge Charger 2011-2026 Owner's Manual / GETTING TO KNOW YOUR VEHICLE / EXTERIOR LIGHTS / Automatic Headlights

This system automatically turns the headlights on or off according to ambient light levels. To turn the system on, rotate the headlight switch counterclockwise to the AUTO position. When the system is on, the headlight time delay feature is also on. This means the headlights will stay on for up to 90 seconds after placing the ignition in the OFF position. The headlight time delay can be programmed 0/30/60/90 seconds within Uconnect Settings.

https://ecufix.info

To turn the automatic system off, move the headlight switch out of the AUTO position.

NOTE:

The engine must be running before the head- lights will come on in the automatic mode.

High/Low Beam Switch, Automatic High Beam — If Equipped

High/Low Beam Switch Push the multifunction lever toward the instrument panel to switch the headlights to high beams. Pulling the multifunction lever back will turn the low beams on...

Parking Lights

To turn on the parking lights and instrument panel lights, rotate the headlight switch clockwise. To turn off the parking lights, rotate the headlight switch back to the O (off) position...

Other information:

Dodge Charger 2011-2026 Owner's Manual: Gross Vehicle Weight Rating (GVWR), Gross Axle Weight Rating (GAWR)

Gross Vehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver, passengers, and cargo. The total load must be limited so that you do not exceed the GVWR. Gross Axle Weight Rating (GAWR) The GAWR is the maximum capacity of the front and rear axles...

Dodge Charger 2011-2026 Owner's Manual: Underhood Fuses

The Front Power Distribution Center is located in the engine compartment. This module contains fuses and relays. Fuse cavity location and descriptions are printed on the inside of the power distribution center cover. CAUTION! When installing the power distribution center cover, it is important to ensure the cover is properly positioned and fully latched...