To open the hood, two latches must be released.
Pull the release lever located underneath the driver’s side of the instrument
panel.
Reach under the hood, move safety latch to the left and lift the hood...
Other information:
The LaneSense system has settings to adjust the intensity of the torque warning
and the warning zone sensitivity (early/med/late) that you can configure through
the Uconnect system.
NOTE:
When enabled the system operates above 37 mph (60 km/h) and below 112 mph
(180 km/h)...
WARNING!
Do not attempt to inspect an accessory drive belt with vehicle running.
When working near the radiator cooling fan, disconnect the fan motor
lead. The fan is temperature controlled and can start at any time regardless
of ignition mode...