Dodge Charger: INTERIORS / Leather Surfaces

Dodge Charger 2011-2025 Owner's Manual / SERVICING AND MAINTENANCE / INTERIORS / Leather Surfaces

Mopar® Total Clean is specifically recommended for leather upholstery.

Your leather upholstery can be best preserved by regular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth. Stubborn soils can be removed easily with a soft cloth and Mopar® Total Clean. Care should be taken to avoid soaking your leather upholstery with any liquid. Please do not use polishes, oils, cleaning fluids, solvents, detergents, or ammonia-based cleaners to clean your leather upholstery.

NOTE:

If equipped with light colored leather, it tends to show any foreign material, dirt, and fabric dye transfer more so than darker colors. The leather is designed for easy cleaning, and the manufac- turer recommends Mopar® total care leather cleaner applied on a cloth to clean the leather seats as needed.

CAUTION!

Do not use Alcohol and Alcohol-based and/or Ketone based cleaning products to clean leather upholstery, as damage to the upholstery may result.

Plastic And Coated Parts

Use Mopar® Total Clean to clean vinyl upholstery. CAUTION! Direct contact of air fresheners, insect repellents, suntan lotions, or hand sani- tizers to the plastic, painted, or decorated surfaces of the interior may cause perma- nent damage...

Glass Surfaces

All glass surfaces should be cleaned on a regular basis with Mopar® Glass Cleaner, or any commercial household-type glass cleaner. Never use an abrasive type cleaner...

Other information:

Dodge Charger 2011-2025 Owner's Manual: Front Head Restraint Removal

To remove the head restraint, raise it up as far as it can go. Then, push the adjustment button and the release button at the base of each post while pulling the head restraint up. To reinstall the head restraint, put the head restraint posts into the holes...

Dodge Charger 2011-2025 Owner's Manual: To Disarm The System

The Vehicle Security system can be disarmed using any of the following methods: Push the unlock button on the key fob. Grab the Passive Entry door handle to unlock the door. Cycle the ignition out of the OFF position to disarm the system. NOTE: The driver's door key cylinder and the trunk button on the key fob cannot arm or disarm the Vehicle Security system...