Dodge Charger: INTERIORS / Glass Surfaces
All glass surfaces should be cleaned on a regular basis with Mopar® Glass Cleaner,
or any commercial household-type glass cleaner. Never use an abrasive type cleaner.
Use caution when cleaning the inside rear window equipped with electric defrosters
or windows equipped with radio antennas. Do not use scrapers or other sharp instruments
that may scratch the elements.
Explore
click here for more info
When cleaning the rear view mirror, spray cleaner on the towel or cloth that
you are using. Do not spray cleaner directly on the mirror.
Mopar® Total Clean is specifically recommended for leather upholstery.
Your leather upholstery can be best preserved by regular cleaning with a damp
soft cloth...
Other information:
The BSM system uses two radar sensors, located inside the rear fascia/bumper,
to detect highway licensable vehicles (automobiles, trucks, motorcycles, etc.) that
enter the blind spot zones from the rear/front/side of the vehicle.
When the vehicle is started, the BSM Warning Light will momentarily illuminate
in both outside rearview mirrors to let the driver know that the system is operational...
High/Low Beam Switch
Push the multifunction lever toward the instrument panel to switch the headlights
to high beams. Pulling the multifunction lever back will turn the low beams on.
Automatic High Beam — If Equipped
The Automatic High Beam Headlamp Control system provides increased forward lighting
at night by automating high beam control through the use of a digital camera mounted
on the inside rearview mirror...