Dodge Charger: Automatic Climate Control Descriptions And Functions / MAX A/C Button, A/C Button

Dodge Charger 2011-2026 Owner's Manual / GETTING TO KNOW YOUR VEHICLE / CLIMATE CONTROLS / Automatic Climate Control Descriptions And Functions / MAX A/C Button, A/C Button

MAX A/C Button

Dodge Charger. MAX A/C Button, A/C Button Press and release the MAX A/C button on the touchscreen to change the current setting to the coldest output of air. The MAX A/C indicator illuminates when MAX A/C is on. Pressing the button again will cause the MAX A/C operation to exit. In MAX A/C, the blower level and mode position can be adjusted to the desired user settings. Pressing other settings will cancel MAX A/C.

NOTE:

The MAX A/C button is only available on the touchscreen.

A/C Button

Dodge Charger. MAX A/C Button, A/C Button Press and release this button on the touchscreen, or push the button on the faceplate to change the current setting. The A/C indicator illuminates when A/C is on.

Automatic Climate Control Descriptions And Functions

Recirculation Button, Auto Button

Recirculation Button Press and release this button on the touchscreen, or push the button on the faceplate, to change the system between recirculation mode and outside air mode...

Other information:

Dodge Charger 2011-2026 Owner's Manual: BRAKE SYSTEM

Your vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic systems loses normal capability, the remaining system will still function. There will be some loss of overall braking effectiveness. This may be evident by increased pedal travel during application, greater pedal force required to slow or stop, and potential activation of the Brake Warning Light...

Dodge Charger 2011-2026 Owner's Manual: Eight-Speed Automatic Transmission

The transmission gear range is displayed both on the gear selector and in the instrument cluster. To select a gear range, push the lock button on the gear selector and move the selector rearward or forward. To shift the transmission out of PARK, the engine must be running and the brake pedal must be pressed...