Dodge Charger: DOORS / Power Door Locks
The power door lock switches are located on each front door panel. Push the switch
to lock or unlock the doors.

The driver’s door will unlock automatically if the keys are found inside the
vehicle when the door lock button on the front door panel is used to lock the door.
This will occur for two attempts. Upon the third attempt, the doors will lock even
if the key is inside.
Find out about
check it out for more info
NOTE:
If the key fob is located next to a mobile phone, laptop, or other electronic
device, the wireless signal may get blocked, and the driver’s door may not unlock
automatically.
If the door lock switch is pushed while the ignition is in ACC or ON/RUN and
the driver's door is open, the doors will not lock.
If a rear door is locked, it cannot be opened from inside the vehicle without
first unlocking the door. The door may be unlocked manually by raising the lock
knob.
The power door locks can be manually locked from inside the vehicle by using
the door lock knob. To lock each door, push the door lock knob on each door trim
panel downward...
The Passive Entry system is an enhancement to the vehicle’s key fob and a feature
of Keyless Enter-N-Go — Passive Entry. This feature allows you to lock and unlock
the vehicle’s door(s) without having to push the key fob lock or unlock buttons...
Other information:
The brightness of the instrument panel lighting and lighted cupholders (if equipped)
can be regulated by rotating the left dimmer control up (brighter) or down (dimmer).
When the headlights are on you can supplement the brightness of the instrument cluster
display, radio and overhead console by rotating the control to the first detent
up until you hear a click...
The LaneSense system is operational at speeds above 37 mph (60 km/h) and below
112 mph (180 km/h). The LaneSense system uses a forward looking camera to detect
lane markings and measure vehicle position within the lane boundaries.
When both lane markings are detected and the driver unintentionally drifts out
of the lane (no turn signal applied), the LaneSense system provides a haptic warning
in the form of torque applied to the steering wheel to prompt the driver to remain
within the lane boundaries...