Before starting your vehicle, adjust your seat, adjust the inside and outside
mirrors, fasten your seat belt, and if present, instruct all other occupants to
buckle their seat belts...
Other information:
Programming HomeLink® To A Miscellaneous Device
Follow the procedure on programming HomeLink® to a garage door opener. Be sure
to determine if the device has a rolling code, or non-rolling code before beginning
the programming process.
NOTE:
Canadian radio frequency laws require trans- mitter signals to time-out (or quit)
after several seconds of transmission, which may not be long enough for HomeLink®
to pick up the signal during programming...
Air Bag Warning Light
This warning light will illuminate
to indicate a fault with the air bag, and will turn on for four to eight seconds
as a bulb check when the ignition is placed in the ON/RUN or ACC/ON/RUN position.
This light will illuminate with a single chime when a fault with the air bag has
been detected, it will stay on until the fault is cleared...